Software development is an integral part of the modern world, owing to the growing digitization and increasing reliance on digital tools, apps, etc. Amid this continually evolving phenomenon, one thing has remained constant: Outsourcing software development projects. The concept of outsourcing is beneficial for software development due to the countless benefits it brings to the table. It includes reduced costs, access to advanced skill sets from all over the world, decreasing hassles, and so much more. However, before one can take it up, there is much to consider, especially the cost.
The cost of outsourcing software development is dependent on a variety of factors, such as how much of the development project you want to or are willing to outsource, the experience and skill of the developer, geographical region where the development team is located, your project’s requirements, and so forth. A developer with fewer years of experience on the resume will be much more affordable than a more experienced programmer, for starters. But keep in mind, with more experience comes better quality, a better place, and so much more.
So, yes, the cost is subjective; but that doesn’t mean you have to be entirely unprepared. Let us take a look at one of the critical factors that decide cost — Location.
Europe: If your developer is based out of Europe, be prepared to pay anything between $20 to $170 per hour. However, if you want to be more specific than that: Eastern Europe is the most affordable lot, whereas developers from Western Europe are the most expensive. And don’t fret about the language differences, since English will get you through the process of finding and hiring a developer in Europe just fine.
North America: Home to one of the most sought-after lots of developers globally, you will pay the highest charges when hiring a developer in North America, especially from the US. On average, developers here command an hourly rate of $50 to $100, which is too much for those with slightly less experience. If you pick an experienced developer, be prepared to shell out about $140 to $200 per hour.
Asia: Often referred to as the software development outsourcing hub of the world, Asia offers not only some of the most highly skilled programmers in the market but also some of the most affordable. No, really; hourly rates can start at as low as $10 and usually max out at about $60 – $70 per hour. However, based on your requirements and skillsets involved, it can also go up to about $150 per hour. It is highly subjective, quite frankly.
To cut a long story short, before engaging in a software company partner program, it is vital to consider your budget and all the many factors discussed above to get a better sense of how much this exercise will cost you and if it is worth the investment.
Over the past two decades, ITCube has been the preferred MS Dynamics 365 Solution Provider for businesses in various domains from manufacturing and sports organizations to large-scale public utility. With so much experience in providing comprehensive solutions, our functional and technical experts have seen the gradual change in the ERP technology and today’s modern business applications are built to effectively manage operations that are complex and need sophistication and customization like never before.
Why Do Legacy Systems Fail?
Many organizations are constantly trying to overcome the challenges faced due to the outdated technology of their legacy systems. Businesses of all sizes have seen gradual progress in ERP technology over the past decade and many of them suffer in the long run as they decide to fix issues temporarily by virtue of different integrations and customizations. As business processes become more detailed and complex, the Dynamics 365 implementation has also evolved.
Handling Product Variations
Complexity in product variations is a common occurrence for businesses in the manufacturing, supply chain domain. Organizations have to pay heed to different sizes, colors, and packaging units and make adjustments. With the Dynamics 365 Integration Services, you can easily make these adjustments but with legacy systems, it becomes harder to incorporate all the changes, making it easier for resources to plan and manage the product inventory.
Control Multiple Channels
As soon as a user raises a new request or action in the system, it moves through different channels and hence becomes harder to track via outdated legacy systems. The success of the ERP implementation lies in how effective it is to have access to multiple channels, users, locations, and operations. Organizations often need Dynamics 365 Integration Services that enables customizations to the solution, making it well-suited to satisfy multiple channels of the business processes swiftly.
Prioritizing Certain Aspects
As a full-service MS Dynamics 365 Solution Provider, any technology partner knows the importance of customizing the modern ERP with parameters and workflows that focus on orchestrating business outcomes. Legacy systems are difficult to manage if you have specific requirements such as prioritizing certain tickets over others due to the urgency of the task, etc.
Easy Deployment
One of the many ways a modern ERP enables business stakeholders to stay hyper-productive is by enabling them centrally deploy any addition or configuration to the process workflow company-wide within a fraction of the time it takes via outdated legacy systems. Such features in the MS Dynamics 365 Managed Servicesempower the stakeholders to have constant access and complete control over the finance, HR, supply chain, and other business process management aspects.
ITCube is one of the most reputed If you are looking for a reputed MS Dynamics 365 Solution Provider in USA and India with an industry-proven portfolio of providing Dynamics 365 implementation, support, customizations and Dynamics 365 Integration Services to customers spread globally, spanning domains such as Manufacturing, Public Utility, etc. If you are looking for a technology partner, email us to discuss your requirement at [email protected]
These days when you say robotics or artificial intelligence (AI), the first thing that comes to mind is futuristic, state-of-the-art technology propelling and transforming the world. It’s potential to transform many, if not all, aspects of human lives are huge, from supermarkets to schools to hospitals to your very own private kitchen.
However, robotics technology is not a new concept. It has been in existence and has played a role in specific industries like manufacturing and automotive factories. It has only been in recent years with new science and technology breakthroughs, and fields of research combined with robotics that the idea of having an advanced robotics technology that has much more potential has risen.
Robots have now become fully autonomous and integrated with Artificial Intelligence. They are invented with the ability to operate and “decide” without human intervention and logic.
What is Robotics Technology?
Robotics is the brainchild of science, engineering, and technology. It encompasses the entirety of creating a robot from the design concept to its construction, operation, and application. These robots are designed to have the ability to read and understand their environment and calibrate their actions to achieve a goal.
Gone are the days when robots are invented and programmed to speed up industrial manufacturing processes. These days the fields of robotics have vastly improved.
The Impact of Robotics Technology
Innovations in the robotics field are happening, and it is happening at a breakneck speed. It is bringing science fiction into real life. It is highly collaborative, research-intensive, and is becoming increasingly complex. With the number of human activities requiring its use increasing over the years, it is no wonder that the demand for innovations and inventions in the field of robotics is high.
With the diversity of potential applications of this technology, it means that consumers can expect to gain a wide range of robotics-related products, from healthcare to military. It can play a crucial role in carrying out tasks that may be considered too hazardous to humans or assisting humans with limited mobility.
Intellectual Property in Robotics
With the speed of robotics technology gaining momentum over the last decade, inventors and developers are now not only facing traditional technical challenges, they now find themselves facing competitiveness at a much higher and complex level. This is where the role of Intellectual Property comes into play.
Since 2009, there has been an increase in the number of granted robot patents published worldwide. This is indicative of the fact that there is an enormous increase in research and development in the field of robotics. And with this large-scale increase comes the substantial need to protect innovations and technology.
Conclusion
Having a robust intellectual property portfolio provides several advantages for big or small companies. With intellectual property rights in place, the robotics company has a better advantage of positioning themselves with potential investors. It is also able to protect competitive threats, build a reliable brand name, and protect the company from intellectual property theft. As technology continues to mature, it is expected that the need for intellectual property protection will increase.
The best electric race car track is an exciting, interactive hobby for automobile fans and anyone who likes speed and competition. Slot cars make an excellent alternative to video games because they tap into similar skill sets—hand-eye coordination, risk-reward thinking, competition, manual dexterity—yet remain physical, i.e. hands-on, three-dimensional, and face-to-face.
We carry two top-quality slot car brands: Carrera, which tends to appeal to younger racers, and Scalextric Sport, which attracts an older audience and enthusiasts. In other words, Carrera may be a bit “toy,” while Scalextric is far more “hobby.” During this post, I’ll explain a number of the features of every brand to assist you to create a far better purchase.
Digital vs. Analogue
Both Carrera and Scalextric offer analogue and digital formats. With an analogue set—the sort that has been around for half a century—you can only race as many cars as you’ve got lanes. Your controller adjusts the present sent to the track lane, which accelerates and slows down the car there is a particular lane. With a digital setup, the controller is programmed to regulate the car itself. Digital sets have crossover sections that allow you to modify from lane to lane for passing, blocking, and overtaking. These tracks also support more cars, in order that three or four (with some sets, up to six) people can race at an equivalent time. I’ll come back to touch later.
3 inquiries to Help Decide What’s Right for You
There are a couple of things to think about upfront if you’re watching a slot car set:
How old are your racers? I don’t recommend slot-car racing for very young children. Ideally, a toddler should be eight or older, and positively no younger than six or seven. Eight might even be pushing it for the more technical demands of a complicated Scalextric set.
You need an honest deal of skill and finesse to navigate the track, especially around turns, and practice is completely necessary. You can’t just take back on the choke and anticipate that the vehicles should fly around faultlessly. they’re going to get off of the slot and skitter away. Of course, that’s a part of the fun. If there have been no skill involved, you’d get bored pretty quickly. For the foremost part, a toddler younger than 8 simply lacks the dexterity and coordination to understand the finer points of adjusting speed to remain on target, and should not have the patience to place within the necessary practice
Where will you put your track? The three-dimensional, hands-on, physicality of slot racing is great, but this does mean that you simply need space to dedicate to your layout. Even the littlest tracks are several feet across. You don’t want it within the middle of the front room where it’ll get stepped over—or on!—bumped, filled with cookie crumbs and pet hair. The track pieces are generally pretty flexible and robust and are designed to face up to a trodding or two, but they aren’t indestructible.
How often will you be racing? it isn’t an honest idea to line up the track, race a couple of laps, then pack it away again. The tracks are designed to be assembled and disassembled without an excessive amount of effort, but only infrequently. Pulling track pieces apart is typically a touch tougher than clipping them together, and may require an honest deal of force. you would like to form sure that you simply tug evenly so you don’t break the connector tabs that hold them together. Repeated assembly and disassembly also will eventually wear and loosen the connectors, when what you would like maybe a snug fit. Your best choice is to line up the track during a place where it is often overlooked, ideally on a table or platform of some sort. Take it apart only you would like to feature to or modify the layout.
Scalextric
Our Scalextric sets are the higher choice for hobbyists. Scalextric sets have bigger, more detailed cars (1:32 scale), a number of which sport cool features like working lights and, within the case of James Bond’s Aston Martin from Goldfinger, ejector seats.
They allow you to build bigger and more technically challenging track layouts, and offer bigger and better opportunities for personalization and modification, especially with Scalextric’s digital sets. There is even a fanatical community of Scalextric racing hobbyists, who conduct full-on tournament racing with rules and regulations. With this in mind, you’ll find that Scalextric tends toward more realism—you won’t find jumps and loops here—and more technical demands.
A Note On Track
Scalextric makes a good range of track pieces to customize your layout. Straight tracks are available in a variety of lengths and formats. A number of the unique pieces that are available include starter grids, crossovers for creating figure-eights, side-swipes for bumping other racers, and single-lane tracks to run alongside pit lanes. There are borders and guardrails that clip along the side of almost any piece of track to assist prevent you from jumping the track. Because the track is flexible, you’ll give some height to your layouts with elevation supports, banked curve supports, and elevated crossovers.
There are numerous options for curves, from lazy wide turns to harrowing hairpins, crossovers, and side-swipes, letting you add plenty of variety and challenge to your set. The track selector wheel demonstrates the range of curves available.
Scalextric Digital
One of the great things about Scalextric is that the transition between analogue and digital is pretty smooth. Upgrading an analogue set would require a replacement power base, transformer, and a few lane-changing tracks, but the cars aren’t hooked into one or the opposite exclusively. Analogue cars will run on a digital set with a couple of button presses on the facility base. Lane-changing is going to be disabled, obviously, but it’s nice to understand that your old cars won’t be obsolete if you upgrade. you’ll do the other, too: a digital car will work on an analogue set, should the necessity arise. Most of the analogue cars we stock from Scalextric come “digital ready,” and maybe upgraded to digital with the straightforward installation of a microchip. And yes, like Carrera, the standard track is compatible between digital and analogue; only lane-changing elements are exclusive to digital setups.
Most digital sets from Scalextric accompany an influence base that supports up to four cars and may do a couple of neat tricks like set the cars to run either clockwise or counterclockwise. Stepping up to the Advanced Six-Car Power Base brings plenty of features, just like the ability to program various racing modes, set speed caps on individual cars, set cars to scale back speed, or maybe pause within the event that one racer jumps the track, and so on. As far as I’m concerned, however, the good feature is the ability to run ghost cars, so you’ve got some competition even when you’re racing by yourself.
ARC systems (App Race Control)
The ARC ONE, ARC AIR, and ARC PRO (for digital sets) are the newest additions to Scalextric’s product lineup, which takes advantage of hand-held smart devices to feature an entirely new dimension to fit racing as a hobby. found a Bluetooth-enabled device opposite the facility base and use the free iOS or Android application to make and control races, track your statistics, manage and share your collection, and more. Before you begin, you’ll choose between several different types of races, including Quick Race, Practice, Grand Prix, Endurance, Tournament, Drag Race, Arcade, and car, although not every race is out there altogether ARC systems. As you play, the app monitors almost anything you’ll consider, from lap times and lap counts to hurry and penalties. There are several cool additions to combine things up. Turning on fuel consumption, tire wear, or car damage, means you’ve got to stay an eye fixed on the condition of your car and make a stop within the pits when necessary—or risk disqualification. There are even random “incidents” like engine blow-outs and punctured tires which will bring another measure of unpredictability and realism to the race. After the race, you get analytic breakdowns of your speed, start reaction times, fuel use, and so on, which you’ll post to Twitter or Facebook.
Finally, there’s a “Garage” mode, during which you’ll catalogue the cars in your collection, save track layouts, and post photos. you’ll also log your track pieces and accessories and use the app to explore possible layout designs. The ARC Systems each have their own exciting features.
ARC ONE
ARC level ARC race system
Hard-wired hand controllers
Core app functionality
Analog system
2-car racing
Key features:
Pit stops
Post-race statistics
ARC AIR
Mid-range ARC race control system
2.4Ghz wireless hand controllers
Intermediate app functionality
Analog system
2-car racing
Key Features:
All of the features of ARC One plus
Wireless controllers (plus rumble)
Variable race conditions
Braking button ARC PRO
Premium ARC race system
2.4GHZ wireless hand controllers
advanced app functionality
Digital system
Multiple auto racing (up to 6)
Key features:
All of the features of ARC AIR plus:
Lane changing
Multiple cars
KERS boost
Go For More Details